Mathews V3 27 Problems With Solutions
"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"
The Mathews V3 27 is a hot topic nowadays between seasoned hunters and archery enthusiasts. It is a great bow, but is it the best?
The answer is NO; just like any other equipment, Mathews V3 27 is not flawless.
So, if you are thinking of buying Mathews V3 27, don’t miss this article because today, we will highlight common Mathews V3 27 problems that many Mathews V3 27 users have reported. So shall we begin?
You Might Also like to Read Our Last Articles: Mathews Triax Problems
fix Mathews V3 27 Problems
Today, we are addressing the Mathews V3 27 problems, but in addition to the problem, we will also be sharing its practical solutions. So, those who already have this bow can use the information to fix the Mathews V3 27 problems.
1. Draw Cycle
A smooth draw cycle is what an archer longs for, and this is the most common problem with Mathews V3 27. Speaking from experience, you have to bear uncomfortably heavy weight while drawing its string. Simply put, it is not an easy-to-pull bow.
If you are not comfortable with the Mathews V3 27 draw cycle, replace the existing bowstring with a custom lightweight bowstring. Another quick hack to remove excessive weight is adjusting the limb bolts. Twist the bolt in an anti-clockwise direction, and it will decrease its weight.
2. String Angle
Another challenge that awaits the Mathews V3 27 owner is its steeper string angle. As the bow is shorter, even if your draw length is average, the string angle of Mathews V3 27 will be a lot for you. Only a few archers have a problem with its string angle, but I would say it’s not a bow for beginners.
The stepper string angle also increases the distance between the peep sight and the archer’s eye, making shooting at the same archer point difficult. Use a larger peep to align your bow and shot accurately. I use TRUGLO Centra Peep; it’s highly durable, lightweight, and easy to use, which is why it’s my favorite.
3. Brace Height
Another problematic feature of Mathews V3 27 is its short brace height. Brace height is something that can’t be compromised because it affects the archer’s shot speed, accuracy, and smoothness of the draw cycle. The shorter the brace height, the harder it would be to tolerate the variation in shooting style.
An easy solution to this Mathews V3 27 problem is to increase the brace height. Now, you must be wondering how you would do that, right? Twist the bow string one or two times, and it will increase the brace height of your Mathews V3 27.
4. Short Axle to Axle (ATA) Distance
Another factor that is badly affected by the steeper string angle and short brace height is the ATA of the bow. Many shooters are comfortable with any ATA, but longer ATA offers more stability. Keep in mind that shorter ATA affects the performance and accuracy of the shots.
You can fix this by adjusting the limb bolts. Tighten or loosen the bolts according to you to change the existing ATA measurement. Any archer can adjust the ATA himself, but it’s crucial to consult professionals or seek guidance from the manufacturer’s guidelines to adjust the Mathews V3 27 ATA without compromising the safety of the bow.
5. Tuning Issue
The Crosscentric Cam of Mathews V3 27 is a commendable feature because it also has SwitchWeight Technology, but with consistent use, the bow starts acting up and gets out of tune. It happens due to many factors, but mainly, the Mathews V3 27 cam system is the root cause of the tuning issue of the bow.
You can resolve this issue by simply changing the settings of your bow. As it’s a dual-cam bow, it needs precise alignment to work properly, so if you are facing a tuning issue with Mathews V3 27, it’s probably because your dual-cam is out of sync. Change the string tension, cam timing, string twists, etc., to align your bow again.
You can also tune your compound bow through its Berger Hole. Try low and high tears to tune the bow and ensure the string and string stop are not touching each other and have a few cm of space in between.
Before using the bow with new settings, make sure the limb bolts are in place and the string is not too tight for the nocks. Try limb dampeners and stabilizers to fine-tune your bow’s performance.
FAQs
How fast is the Mathews V3 27?
The IBO rating of the Mathews V3 27 is 342 FPS.
How long is the string and cable on a Mathews V3 27?
The string and cable of the Mathews V3 27 are 58 1/2″ and 25 15/16”, respectively.
How do you increase the draw weight on Mathews V3?
To increase the draw weight, turn the bolts in a clockwise direction. You can use a 3/16” or 7/32” Allen Wrench to do this.
Do Mathews’s bows run long?
Yes, Mathews’s bows are extremely durable and offer high performance for at least ten years.
What kind of strings does Mathews use?
Mathews only uses MATCH bowstrings. These are specially designed for Mathews’s bows. It eliminates stretch and peep rotation.
Conclusion
There is no doubt Mathews V3 27 is a bow that has many advanced features, but that doesn’t mean it has no faults. We have mentioned all the problems that Mathews V3 27 users have experienced while using this bow. The good news is that you can find solutions to these problems here, too.
So, if you have a Mathews V3 27 and are facing any of the above-discussed issues, try our practical solutions to solve the issue in a few minutes. I hope our recommended solutions help you optimize your bow and enhance your archery experience by fixing the Mathew V3 27 issues.
Thanks For Visiting!
Related Articles: