Mathews Halon 32 Problems - Let’s Solve Them 2023

Mathews Halon 32 is one of the most advanced and sought-after bows on the market today. Its power, accuracy, and features make it an ideal choice for bowhunters, target shooters, and 3D archers alike.

Unfortunately, this great bow can be plagued with problems that can impede performance or even render it unusable.

Fortunately, many Mathews Halon 32 problems have easy solutions that are often overlooked by users of the bow.

In this article, we will discuss some common Mathews Halon 32 problems as well as their simple fixes so you can get back to enjoying your shooting experience in no time!

And with that said, let’s not waste any more time and jump straight into it!

I’ve already made an article about Mathews Triax Problems which I recommend you to read.

Table of Contents

Comen Mathews Halon 32 Problems

If you own a Mathews Halon 32, it is an excellent bow. I have used it for a long time. However, some problems are common with this specific bow model. Now, this doesn’t mean that the crossbow is of low quality or you shouldn’t buy it at all.

However, just like any other mechanical tool you need to be prepared for the issues that are associated with it and be able to fix them whenever you encounter them during your usage. The best this is that you don’t need need to be an ultra-expert to fix your crossbow. This guide has got you completely covered.

Here are some of the most common issues.

1. String Buzzing

This is a very common issue with Mathews Halon 32 owners and can be caused by several things, such as loose yokes or worn-out strings. String buzzing can be an annoying issue as it causes a loud and irritating sound when you draw your crossbow.

Luckily, this issue has an easy fix.

First of all, check the yokes on your bow and make sure they are properly tightened. If not, then simply use a wrench to tighten them up until they fit snugly against the limbs of your bow. Secondly, if you find that the strings are worn out or frayed, it is best to replace them with a new set.

You May Also Read: Where To Put String Silencers On Compound Bow?

2. Cocking Issues

Cocking issues are also very common with Mathews Halon 32 crossbows and can be caused by a few different things. The main culprits are often weak limbs, misaligned pulleys, and worn-out cables.

Thankfully, this problem is easy to fix and can be solved with a few simple steps. To start off, make sure that the limbs of your bow are in good condition and not damaged or bent in any way. Then, check that the pulleys are properly aligned and tightened down. Finally, if you find that the cables are worn out, it is best to replace them with new ones.

3. Poor Accuracy

Poor accuracy can be a major issue when shooting your Mathews Halon 32 and may be the result of loose screws or poor arrow selection. Loose screws can cause the bow to vibrate during firing and make it difficult to maintain accuracy.

To fix this issue, check all of the screws on your bow and make sure they are properly tightened using a screwdriver or Allen wrench. Additionally, it is important to select arrows that match your bow’s draw weight and length as well as other specifications so you can ensure maximum accuracy when shooting.

Hopefully, these solutions should help you fix any issues you may be having with your Mathews Halon 32 crossbow. If all else fails, it is always best to consult a professional archery technician who can help diagnose and repair the issue properly.

4. Timing Problem

A timing problem is a common issue with the Mathews Halon 32 and can be caused by worn-out cams or an improper set-up bow. The result of timing problems is often misaligned pulleys and cables as well as a lack of power when firing the bow.

Fortunately, this issue can be fixed with a few simple steps. To start, check that the cams are not worn out and are in good condition. Then, make sure that all of the components of your bow are properly aligned and tightened down using a wrench or Allen key.

5. Left Lateral Nock Travel Problem

If you have a Mathews Halon 32 Crossbow that is experiencing left lateral nock travel, there are several things you can do to help fix the issue. First, make sure that the arrow rest is tightened and secure. If it isn’t, tighten it using an Allen wrench until it is snug against the riser.

Next, check to make sure that the arrow is properly aligned with the center shot mark. If it’s off, adjust it until it is perfectly centered. Then, use a bow square to ensure that the nock point and string angle are both levels.

Finally, make sure that your pro-loc quiver is properly mounted and that the arrows are being released at the same angle as they were set. If any of these checks yield unsatisfactory results, you may need to have your bow professionally serviced.

If all else fails and you cannot determine a cause for the left lateral nock travel issue, contact Mathews customer service directly. They will be able to walk you through the troubleshooting process and help get your Mathews Halon 32 Crossbow shooting straight again.

Can you shoot with Mathew’s limb legs?

Yes, Mathew’s limbs are designed for shooting and can be used for hunting and target shooting.

The limbs are made with lightweight materials and feature advanced technologies such as E-Grip Technology to reduce hand vibration, the PerfeX cam system to optimize performance, and a Harmonic Damper to eliminate string oscillation.

They also come with multiple draw lengths and poundage so shooters can customize their setup to fit their specific needs.

All of these features make Mathews limbs an excellent choice for any shooter looking for ultimate accuracy and performance.

How do you adjust a Mathews bow?

Mathew’s bows come with adjustable settings that allow shooters to customize their setup for improved performance.

To adjust a Mathews bow, start by checking the cam alignment and making sure it is properly set. Next, adjust the draw length and weight according to your needs and preferences. You can also fine-tune the let-off percentage of your bow depending on how much you want it to help you hold your aim while shooting.

Finally, make sure to check the timing of your bow by using a Bowtech Timing Tool or an Allen Wrench. This will ensure that all components are in sync so you get consistent performance every time you shoot.

By following these steps, you should be able to easily adjust your Mathews bow to your desired settings.

Last Minute Thoughts!

So this was all about the Mathews Halon 32 problems and their solutions. If you have made it this far, you must have learned about different kinds of issues and how to fix them one by one.

This guide has provided a strong base for you now and you can easily go hunting with your bow without any issues now.

We hope after reading this article, you found it helpful and learned quite a lot about the Mathews Halon 32 crossbow issues. If you have enjoyed reading this article, please don’t forget to share it with your friends and family.

Also, make sure to leave us a comment below if you want to ask us anything further about the Mathew Halon 32 or any other crossbow and bow model

Thanks For Reading And Happy Hunting!

Related Posts:-

Good luck!

Mathews Halon 32 Problems – Let’s Solve Them 2023