How to Build an Archery Target For a Compound Bow?

Building an archery target for a compound bow is a fun and relatively easy DIY project. However, a lot of people may still not know how to build an archery target for a compound bow. This is why we have written this detailed guide to help you out.

After reading this article, you will be able to select the right material and learn to make your own archery target. This target will be capable of taking shots from a compound bow easily without any issue at all.

If all this sounds interesting enough to you, then we highly recommend you to keep on reading because below you will find a lot of interesting information.

With that said, let’s not waste any more time and jump straight to the section where we learn how to build an archery target for a compound bow.

Table of Contents

What Kind of Material Do I Need to Make an Archery Target?

Before we move on to the section and start learning how to make the target, you need to understand something very important. It is the kind of material you will need in order to make the target itself.

You see, not all materials are capable of taking shots from a compound bow. In fact, most materials will easily get damaged if they are hit by an arrow shot from a compound bow.

I’ve already made an article about “Points Is A BullsEye In Archery?“, which I recommend you read.

This is why it is very important that you use the right kind of material for your target. We would recommend you to use something like high-density foam. This is because high-density foam is designed to take shots from high powered bows without any issue at all.

Apart from that, high-density foam is also very affordable which means you won’t have to spend a lot of money on this project.

What Kind of Material Do I Need to Avoid?

Now that you know what kind of material you need to use, it is also important to know what kind of material you should avoid. As we mentioned above, not all materials are designed to take shots from a compound bow. In fact, most materials will easily get damaged if they are hit by an arrow shot from a compound bow.

This is why it is very important that you avoid using any kind of soft material for your target. This includes materials like hay, straw, or even cotton. These materials are not designed to take shots from a high powered bow and will easily get damaged if they are hit by an arrow.

So, make sure you avoid using any of these materials for your target. Otherwise, you will just end up damaging your target and wasting your time and money.

How to Make an Archery Target For a Compound Bow?

Now that you know what kind of material you need to use, it is time to learn how to make the target itself. The process is actually very simple and can be done by anyone.

Step 1: Cut the Foam into Shape

First, you need to cut the high-density foam into the desired shape. We would recommend you to use a circular or square shape for your target. However, you can also use any other shape if you want.

Step 2: Cover it with Some Fabric

Once you have cut the foam into the desired shape, it is time to cover it with a layer of fabric. This is important because it will help protect the foam from getting damaged.

Step 3: Attach the Target to a Stand

After you have covered the foam with fabric, it is time to attach the target to a stand. This will help keep the target in place so that it does not move around when you are shooting at it.

You can either use a freestanding target stand or an wall-mounted target stand. If you are using a freestanding target stand, then make sure it is stable enough to take shots from a high-powered bow.

And that’s pretty much it. Once you have followed all these steps, your archery target for a compound bow will be ready to use. If you want to make your DIY archery target for compound bow a bit more eye-catching then you can paint it.

A lot of archers love to paint bulls eye on their targets. It allows them to easily measure their progress and track their improvement over time. So, if you want, you can also paint a bulls eye on your target.

What is the Height of an Archery Target?

The height of an archery target depends on the type of bow you are using. If you are using a recurve bow, then the target should be at least 28 inches tall. However, if you are using a compound bow, then the target can be as tall as 36 inches.

Keep in mind that these are just general guidelines. The actual height of the target may vary depending on your personal preference and shooting style. Always make sure to draw a few test shots and see what works best for you.

Some people are easy with low targets first and then they make their way to the higher ones.

What is the Distance of an Archery Target?

The distance of an archery target also depends on the type of bow you are using. If you are using a recurve bow, then the target should be at least 20 yards away from you. However, if you are using a compound bow, then the target can be as far as 30 yards away from you.

Some people find it easy to shoot at targets that are closer to them while others prefer targets that are further away. It all depends on your personal preference and shooting style. So, make sure to experiment a bit and see what works best for you.

What Are the Different Parts of an Archery Target?

There are three different parts of an archery target: the face, the backstop, and the frame.

The face is the part of the target that you actually shoot at. It is usually made out of a high-density foam or a similar material.

The backstop is the part of the target that stops the arrow from going all the way through. It is usually made out of a thick piece of fabric or a similar material.

The frame is the part of the target that holds everything together. It is usually made out of metal or a similar material.

These are the three different parts of an archery target. Knowing about them will help you understand how the target works and how to properly set it up.

Last Minute Thoughts!

So how to make an archery target for a compound bow? We have already listed all information above. However, in order to quickly conclude this article you will need to pick the right kind of material first.

We hope this article has provided you with all the information you need to get started. Just remember to use high-density foam for your target and to avoid using any soft materials.

Other than that, just follow the steps mentioned above and you will have your very own DIY archery target in no time.

If you have any questions or comments, then please feel free to leave them below. We would love to hear from you!

Thanks For Reading!

Related Articles:

How to Build an Archery Target For a Compound Bow?

What Kind of Material Do I Need to Make an Archery Target?

What Kind of Material Do I Need to Avoid?