Mission Sub 1 XR Problems
"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"
You must be aware of all the Mission Sub 1 XR problems before you decide to purchase it.
This is because it is always good to know what to expect from a crossbow so that you will have just enough expectations from it and nothing more or less. Indeed, this crossbow has a few problems, some of which are fixable and some not.
So, what I am about to do is point out all these problems one by one and then state their solutions to each problem.
I will also clearly mention which problems are solvable and which ones are permanent. So, the following read is going to prove to be very beneficial for you all!
Mission Sub 1 XR Problems
Cocking Issues
The Mission Sub 1 XR crossbow has some major issues regarding its cocking system. In fact, there is no adjustment mechanism when it comes to cocking the crossbow. Whether you set the string to ‘Safe’ or ‘Fire’ mode, the speed and action will be exactly the same for both modes.
In addition to that, there is absolutely nothing you can do to get this issue fixed. You will just have to get yourself accustomed to this cocking problem.
Dry Fire
Another critical problem with this crossbow is that the locks do not engage easily. In fact, you will have to stretch the string too far backward to engage the safety mechanism and the locks. In case you leave the string without engaging the locks, the crossbow will dry fire!
This might lead to severe injuries to the unsuspecting user. And that is not it as dry firing can also negatively affect the entire structure of the crossbow, leading to a very inaccurate and malfunctioning crossbow. So, the only way to avoid this problem is by engaging the locks forcefully before letting go of the string.
The String Wears Out Too Quickly
As I mentioned earlier, you will have to stretch the string too far back in order to engage the locks. However, that negatively impacts the string and causes it to wear out very quickly. So, you will have to get it replaced very often.
There is nothing you can do to solve this issue except to humbly accept the fact that you will have to pay for the string replacement every few months.
No Fire Situation
Another possible malfunction that you might encounter with the Mission Sub 1 XR is that the crossbow might not fire even when it is fully cocked and loaded. This is again a sub-problem of the original cocking problem that we discussed earlier.
I know this issue can be very annoying and can cost you precious prey during the hunt; however, the only way to avoid this problem is by making sure that you properly cock the crossbow before taking aim.
Trigger Issues
Sometimes, the trigger of this crossbow can get jammed, and you just stand there holding the crossbow, wondering why you ever chose to purchase this crossbow in the first place. However, the good news is that you can get the trigger issue repaired by a professional.
The reason why the trigger gets jammed is the poor structure of the crossbow and misalignment. The professional will fix the alignment issues and get the structure of the crossbow in shape. This will permanently eliminate the trigger issues and won’t cost you much, either.
Pros Of Using The Mission Sub 1 XR
I know I made this crossbow sound very bad and a malfunctioning piece of crap; however, the reality is quite the opposite. It is indeed a very fine piece of hunting weapon except for a few problems. It is super lightweight and ambidextrous.
Other than that, it is a very petite crossbow that you can easily carry around on your hunting expeditions without feeling overburdened. Plus, it is a very powerful crossbow that will swiftly catch your prey if only you can learn to cock it properly!
FAQs
Is the Mission Sub 1 XR crossbow any good?
Yes, the Mission Sub 1 XR crossbow is indeed a very fine weapon. It is super lightweight and small in size, which means that you can easily carry it around the field while hunting. However, it does have a few cocking and structural issues that you will have to get fixed before tagging it along to your next expedition.
How can I fix the trigger of my Mission Sub 1 XR crossbow?
There is no way you can fix the trigger of your Mission Sub 1 XR crossbow unless you are an expert in this area. It is a highly technical job, and one wrong move can cause further problems. So, it is better to leave it to the professionals.
The Bottom Line
So, it is safe to say that Mission Sub 1 XR is indeed a very good crossbow; however, it does have some serious issues. You need to be aware of all the problems and their solutions before you even think about buying this crossbow. Of course, a few issues with this crossbow are not fixable, and you will just have to accept them as they are.
For instance, this crossbow has a major cocking issue, so you will have to ensure that you pull the string far enough to engage the locks manually. However, that will quickly wear out the string, and you will have to get it replaced every few months. Besides that, this crossbow also has structural and trigger issues, but those are problems that you can fix with the help of a trained professional who understands crossbow issues.
Thanks For Visiting!
Related Articles:-