All Models Tenpoint Crossbow Problems

If you are thinking about Tenpoint crossbows you might want to read this article to the end. This is because although these are some good crossbows, they can still have problems. In this article, we will talk about all the tenpoint crossbow problems along with their solutions.

After reading this guide you should be able to troubleshoot your bow if you already have one. Or at least have a basic idea of the problems associated with different crossbow models from Tenpoint.

So with that said, let’s not waste any more time and get straight into it!

Table of Contents

What are the Most Common Tenpoint crossbow problems?

Although Tenpoint produces different models of crossbows there are some problems that are most common in all models. So instead of mentioning it again and again at each crossbow model, I would like to discuss them all here generally.

Once we have established a basic understanding of the common problems, then we can move on to a discussion of the specific models.

The common and most frequently seen issues with tenpoint crossbows are:

1. Poor Accuracy

The first thing that most people face with their crossbows is the issue of accuracy. Although Tenpoint crossbows are one of the best still they sometimes suffer from the accuracy issue. This is because of the arrows not being ‘flight ready’, the scope being out of alignment, or the wrong arrow spine.

2. Dry Firing

This is one of the most dangerous problems you can face with your crossbow. Dry fire happens when there is no bolt in the chamber and you pull the trigger anyway.

This will cause damage to the barrel, bowstring, and other components of a crossbow which might even cost you hundreds or thousands of dollars depending on your model.

3. Jamming/Misfire Issues

Another common issue with tenpoint crossbows is misfiring and jamming issues after having fired several shots. This is caused by dirt particles stuck inside the barrel, poor lubrication or an old string that is out of tune.

These are the most common issues that a person might face while using Tenpoint crossbows. Although there could be other models specific problems too, which we will discuss later in this article.

So let’s move on and talk about how to solve these issues.

How to Solve Common Tenpoint Crossbow Problems?

The solutions for all the above problems are quite simple and easy to understand. Let us start with the accuracy issue first as it is relatively easier to fix than others:

Solving the Issue of Low Accuracy on Your Crossbow

If you notice that the crossbow is not hitting the target as accurately as you want it to, then the first thing that needs to be checked is the scope.

The scope needs to be properly calibrated and aligned with the barrel in order for it to shoot accurately. If you are still having accuracy issues after this, then maybe there is something wrong with your arrows.

A crossbow bolt needs to have a spine that is similar to or slightly heavier than the one recommended by the manufacturer if you want it to fly straight and hit the bullseye every time.

Solving Jamming/Misfire Issues on Your Crossbow

If you are facing jamming or misfire issues frequently then chances are that there is something stuck inside your barrel or your bowstring has become too dry because of lack of lubrication.

In order to solve this issue, the first thing you need to do is clean your barrel properly and make sure that all dirt particles are removed from it.

Then you should apply some lube on the string as well as other components in order to reduce friction and maximize performance.

Solving Dry Firing Issues on Your Crossbow

The best way to prevent dry firing is by following a few safety precautions such as never pulling the trigger without having an arrow in the chamber, always unloading your crossbow when not in use, and avoiding tight cocking.

If somehow you have already experienced dry fire then chances are that there will be some damage done to your crossbow components which need to be checked and fixed as soon as possible.

You can either take it to a professional or try fixing it yourself if you know how to do so.

Tenpoint Siege RS410 Problems

The Seige RS410 usually experiences issues like scope alignment, low accuracy, dry firing, and others that we have discussed above.

It can also suffer from the issue of excessive string noise when being shot. This is caused by a lack of lube on the string or due to a weak limb spring which needs to be changed if possible.

Apart from this, making sure that all components are properly tightened is also important in order to increase performance as well as reduce unnecessary noise.

Apart from that, there are some specific issues that are limited to this model only. These problems include rail and serving problems, trigger and cocking issues, cable creep, and others that can only be solved with the help of a professional.

Tenpoint vapor rs470 problems

The RS470 is another great crossbow but like other mechanical equipment, this piece of art also experiences problems. Now the issues that I have spotted mostly on the RS470 model are related to firepower and safety mechanism.

It turns out that the bow has a poor stock string which is the main culprit behind the power of the crossbow being limited. The solution to this problem is to replace the stock string with a better-quality one so that more power can be generated while shooting.

Another issue that some RS470 owners have faced is related to the safety mechanism which on a few occasions fails to engage after cocking, and might even stay engaged when there is no arrow in the chamber. This issue needs to be addressed immediately as it could lead to accidents and injuries if not taken care of properly.

The last problem with this model is related to its trigger pull weight, which for some users has been reported as too high or too low. However, all these problems can be fixed one by one with proper professional help or even by yourself if you feel confident enough.

Tenpoint Vengent S440 Problems

TenPoint Vengent S440 crossbows are known for their reliability and accuracy, however, like most crossbows, problems can occur that prevent them from performing at their best.

Common issues include the dry firing of the string, difficulty cocking the bowstring or the arrows not grouping together when shot from the same distance. Other potential problems could be a malfunctioning safety lever, an issue with the trigger assembly, or a misaligned scope.

Some of these issues can easily be corrected by following the recommended maintenance procedures in your owner’s manual.

For more serious issues it is important to contact TenPoint directly for assistance as they may have additional advice or tools available to help you troubleshoot and repair your crossbow.

The company also offers an online repair center where you can submit a service request for help with your TenPoint Vengent S440 crossbow.

By following the maintenance and safety procedures, as well as contacting the manufacturer when needed, owners of the TenPoint Vengent S440 can ensure their crossbow is always performing at its best.

Tenpoint Titan M1 Problems

The TenPoint Titan M1 is a popular crossbow among the hunting community due to its superior accuracy and power. However, it’s not without its issues. Here are some of the common problems associated with the TenPoint Titan M1:

The bolts on the TenPoint Titan M1 can come loose during firing which can reduce accuracy and cause safety concerns. Be sure to check your bolts before every use and secure them firmly as needed.

The trigger pulls weight on the TenPoint Titan M1 is heavier than most other crossbows, which can take some getting used to for shooters who are used to lighter triggers. This can also lead to a decrease in accuracy.

The TenPoint Titan M1 requires a great amount of force to cock it, which can make it difficult for weaker shooters or those with limited dexterity. This can also lead to misaligned bolts and reduced accuracy.

The AccuDraw 50 included with the TenPoint Titan M1 has been known to be bulky and inaccurate due to its design. It’s recommended that you upgrade the device or find an alternative if precision is key for your hunting needs.

The TenPoint Titan M1 is a powerful crossbow that generates a lot of wear and tears on components over time, even when well-maintained. You should be prepared to replace parts or make repairs as needed.

Tenpoint Turbo Xlt 2 Problems

TenPoint Turbo XLT 2 crossbows are known for their impressive accuracy, velocity, and power. However, they can occasionally experience issues that may require professional help to resolve.

Common problems with the TenPoint Turbo XLT 2 include failure to cock correctly due to a broken or worn-out string, failure of arrows to launch properly due to binding in the barrel, misaligned scope causing poor accuracy, and difficulty with the safety switch disengaging.

Additionally, some users may find the trigger pull weight too heavy or uncomfortable. If you’re experiencing any of these issues with your TenPoint Turbo XT2, take it to an authorized service center for repairs or replacements.

Additionally, make sure to regularly clean and oil all components of your crossbow for optimal performance.

To avoid any issues, always unload your crossbow and inspect it before each use to make sure all components are working correctly and securely. If you have any questions or concerns about the operation of your TenPoint Turbo XLT 2, please contact an authorized service center for assistance.

By following these steps and taking proper care of your TenPoint Turbo XLT 2 crossbow, you’ll be able to continue using it for years to come without any problems.

Tenpoint Shadow Nxt Problems

One of the most common problems people encounter with their Tenpoint Shadow NXT crossbow is a jamming issue. This usually happens when the bowstring or cables become too tight, leading to insufficient space for the arrow to move properly.

If this occurs, it is important to immediately stop shooting and inspect your crossbow before continuing use. Another issue that can occur with the Tenpoint Shadow NXT is the failure of the trigger assembly.

The trigger on the Tenpoint Shadow NXT is designed to be easy to use and reliable; however, if it fails or breaks during operation, it can lead to dangerous situations. If you experience any issues with this component, it should be replaced immediately by qualified personnel who are trained in working with firearms and archery equipment.

Finally, it is important to keep all components of your Tenpoint Shadow NXT clean and lubricated in order to ensure optimal performance. This includes regularly cleaning the string and cables as well as routinely oiling and inspecting the stock, trigger assembly, and other parts for signs of wear or damage.

If you are unable to perform these tasks yourself, then a qualified professional should be consulted. Doing so will help prolong the life of your crossbow and enable you to enjoy archery safely for years to come.

Last Minute Thoughts!

Finally, this article came to an end and you have learned about all of the Tenpoint crossbow problems and their potential solutions. Remember there are no perfect weapons on earth and most of them experience problems.

Although I personally don’t like their crossbow still they are good for hunting small game in the woods. So if you have one, take care of it and remember to check for potential problems so that you can enjoy your hunting season with a safe weapon! Thank You.

Related Posts:-

Happy Hunting!

All Models Tenpoint Crossbow Problems – [Diagnose & Fix]