"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"
It would certainly help to know the Barnett Quad 400 problems well in advance before you even consider buying it in the first place. It is no doubt a very good and powerful crossbow; however, it does have a few issues that you must keep in mind so that you can avoid or eliminate them promptly. The good news is that I am about to discuss all these problems and their solutions below for your ease.
However, before we get started, let me give you a brief overview of all the problems that you might face with this particular crossbow. Amongst many other issues, the most prominent ones include occasional dry fire, faulty sensors, and string malfunctioning. I suggest you read the following complete article for further details and solutions.
You Might Also like to Read: How to Restring a Barnett Crossbow Without a Bow Press?
fix Barnett Quad 400 Problems
1. Defective Sensor
One of the most commonly discussed problems with the Barnett Quad 400 is that it has a defective sensor. However, I would not go as far as to say that the sensor is defective altogether, but it is not of the very best quality. Hence, it wears off pretty quickly.
This wearing of the sensor leads to the crossbow loading itself on its own and dry firing. It is not only dangerous for the user but also for the crossbow itself since it might cause structural inaccuracies.
So, I would suggest that you get the sensor replaced every few months so that you won’t have to face this problem at all. However, if you can not afford to replace the sensor too often, you might as well want to clean it up at the very least.
2. Broken Strings
Another problem that I faced with the Barnett Quad 400 crossbow is that the strings keep breaking down pretty quickly. This happens because the bolts get loose and slightly inch forward towards the string every time you load the crossbow. This weakens the string’s longevity, and a point comes when the strings cannot withstand the pressure, and they give in.
There are two things you can do to solve this issue. First, you must tighten the bolts every few days so that their positioning won’t affect the string tension and elasticity. The bolts must have a gap of at least two inches from the string.
Secondly, you must keep a keen eye on the health of your strings. You must get it promptly replaced at the first sign of any wear and tear. It would be better to have the faulty string replaced on time rather than have it break mid-hunt.
3. Dry Fire
As I mentioned earlier, you might also face a dry fire issue with the Barnett Quad 400 crossbow. It could be primarily because of the faulty sensor or simply because you are not careful enough with the crossbow. Dry fire happens when your crossbow is loaded and yet to be bolted, but the crossbow’s trigger gets pulled somehow.
This issue can have a very negative impact on the overall health of the crossbow as it might dislocate or loosen up the entire structure of the crossbow. Other than that, it might also injure you when you are off guard and casually holding your crossbow.
So, there are a few things that you can do to eliminate this problem. For instance, you could take care to unload a crossbow when it is not in use. This will eliminate the issue of dry fire at all.
In addition to that, you must get the sensor of your crossbow checked to see if it is malfunctioning. And finally, you must take extra care to engage the safety locks of the crossbow every time you load it.
4. String Not Pulling Back
Another very common issue that you might face with your Barnett Quad 400 crossbow is that the string might get stuck, or you might not be able to pull it back all the way to engage the locks. This happens when the string gets too worn out or dirty.
Recommended: How To Treat A Bruise From Bow String Slap?
Other than that, this might be happening to you due to loose or faulty locks. So, to fix this issue, you will have to see where the problem lies in the first place.
If it is due to the string, I would suggest getting the strings replaced. And if it is due to the sensor, you must get it cleaned or replaced!
Is Barnett Quad 400 worth it?
Yes, the Barnett Quad 400 crossbow is worth a shot if only you can learn to avoid running into problems.
But for that, you will have to learn what kind of problems you might face with this crossbow and then try to avoid them or get them fixed on a timely basis. This approach will enhance your overall experience with this crossbow and increase its longevity.
The Bottom Line
So, I would say that the Barnett Quad 400 crossbow does indeed have a few internal problems, but none of them lasts forever. You can easily get the issues fixed in no time at all and with minimal spending. You just have to pinpoint where the problem lies and then target that specific point to eliminate the problem.
For instance, if you are having issues switching the sensor, you may try cleaning it all by yourself. But if that doesn’t work, you will have to get it replaced altogether.
The same goes for dry firing issues; you will have to keep the crossbow unloaded and the string in perfect condition to avoid this problem. So, I would suggest that you keep close checks on your crossbow.
Thanks For Visiting!