How to Restring a Barnett Crossbow Without a Bow Press?
Are you the proud owner of a Barnett crossbow? Have you been wondering how to restring your Barnett crossbow without the use of a bow press? Have no fear, restringing your crossbow doesn’t have to be a daunting task.
In this article, we will discuss the process of restringing your Barnett crossbow without the use of a bow press. We will discuss the tools, supplies, and techniques needed to safely and effectively restring your Barnett crossbow without the use of a bow press.
I’ve already made an article about “How Much Does It Cost To Restring A Compound Bow“, which I recommend you to read.
So if you’re looking for an easy and cost-effective way to restring your Barnett crossbow, then read on and find out how!
Things You Will Need for this Project
List of Materials Needed
To restring a Barnett Crossbow, you will need the following materials:
- String – Most Barnett Crossbows use a 16-strand string. Check the owner’s manual to make sure you get the right size.
- Cables – Cables are what actually connect the limbs to the string. Make sure you get the right size and type of cables for your crossbow.
- Cable Slide – The cable slide is what you use to attach the cable to the limbs. It should fit the model of your crossbow and should be able to move freely.
- Nock Points – Nock points are used to attach the string to the cables. Make sure you get the right size and type of nock points for your crossbow.
- Serving – Serving is a type of thread which is used to hold the string and cables together. It is important to buy the right type of serving for your crossbow’s model.
List of Tools Needed
In addition to the materials needed to restring a Barnett Crossbow, you will also need some tools. Here’s a list of tools you will need:
- String Jig – A string jig is used to hold the string and cables in place while you are attaching them to the limbs.
- Allen Wrench – An Allen wrench is used to loosen and tighten the cable slide and nock points.
- Servicing Tool – A servicing tool is used to attach the serving to the string and cables.
- Pliers- Pliers are used to pinch the nock points and cable slide in place.
- Bow Scale – A bow scale is used to measure the tension of the string. This is important to make sure the string is not too tight or too loose.
By having the right materials and tools, you can restring your Barnett Crossbow quickly and easily. Restringing your crossbow is a great way to make sure it is in optimal condition and ready to shoot.
Restringing a Barnett Crossbow [Steps To Follow]
Here’s a detailed guide on how to restring a barnett crossbow without a bow press. After reading this section, you should be able to do the job without any issues what so ever.
Step 1: Removing the String
Before beginning the process of restringing a Barnett Crossbow, the first step is to remove the string. To do this, you’ll need an allen wrench. Insert the allen wrench into the two bolts located at the top of the crossbow and loosen the bolts. This will cause the string to come loose and can be removed. Make sure to save this old string so that you can use it as a reference when measuring the new string.
Step 2: Measuring and Cutting the New String
Next, you’ll need to measure and cut the new string for your Barnett Crossbow. Measure the old string to determine the length that is needed for the new string.
Then, carefully cut the new string to match the old string’s length. It is important to make sure that the new string is the exact same length as the original. If the string is too long, it can cause the crossbow to misfire or jam, resulting in injury.
Step 3: Attaching the String to the Crossbow
Now that you have the new string cut and measured, the next step is to attach it to the crossbow. Insert the two ends of the string into the loops on the cam and pull the string down to secure it in place. Make sure to keep the string tight and secure as you do this.
Step 4: Tensioning the String
Once the string is attached to the crossbow, the next step is to tension the string. To do this, use the Barnett Crossbow’s supplied wrench to turn the limb bolts clockwise.
This will increase the tension on the string until it is at the desired level for your crossbow. It is important to not over-tension the string, as this can cause the string to break.
Step 5: Finishing Up
Once the string is secure and at the right tension, the next step is to finish up the restringing process. To do this, make sure to inspect the crossbow and check that the string is tight and secure.
Make sure that the limbs are aligned properly and that all the bolts are secured. This will ensure that the crossbow is ready to use and perform optimally when you are ready to fire.
When restringing a Barnett Crossbow, it is important to follow these steps carefully in order to ensure the safety of yourself and those around you.
In addition, when using a crossbow, you should always wear protective eyewear and hearing protection. These safety precautions can help prevent injury from a misfiring or jamming crossbow.
Final Words!
In conclusion, restringing a Barnett crossbow without a bow press is a difficult task that requires several special tools and a great deal of patience. However, it can be done with the right instructions and the right tools.
With a little bit of time and commitment, you can successfully restring your Barnett crossbow. With the right knowledge and resources, you can be sure that your Barnett crossbow will perform its best.
Never hesitate to seek assistance from a qualified archery technician if you are unsure of the process or need help.
Thanks For Visiting!
Related Articles:-
- Barnett Crossbow Problems
- How Much Does it Cost to Restring a Crossbow?
- What Should You Do When Operating a Crossbow?
- What Should You do When Cocking a Crossbow?
- How Does A Crossbow Arrow Compare To A Conventional Arrow?
- Is It OK to Leave a Crossbow Cocked Overnight?
- Are Recurve Bows Good For Hunting?
- How Long Can You Leave a Crossbow Drawn?